Framing; Focusing; Still Projection; Reverse - Bell and Howell Autoload 456 How To Use Manual

1 2. framing
If your picture is cut off at
the top or bottom of your
screen, rotate the Framer
Knob in either direction,
until the full picture ap-
pears on your screen.
1 3. focusing
8
Focus your projector in the
first few seconds of your
movie by rotating the Focus
Dial in either direction, until
your picture is sharp and
clear. Now just sit back and
enjoy your show.
l
\
1 4. sti
11
projection
To stop and enjoy a single
frame of your movie, first
move the Direction Lever to
the center position (picture
A). If screen is dark or par-
tia I picture is projected ,
rotate the Single Frame Ad-
vance Knob (picture B) until
the frame you desire to view
appears on the screen. To
resume normal movie speed,
just move Direction Lever
up to "FORWARD" position.
15. reverse
To reverse the action of
your movies for special ef-
fects or to review an earlier
scene, move the Direction
Lever down to the "RE-
VERSE" position. To resume
normal forward projection,
simply move Direction Lever
up to "Forward" position.
NOTE: In reverse operation,
the take-up reel may remain
stationary although the film
is transporting properly.
9