Advertisement
Battery Replacement
Note: For best performance, we
suggest replacing the batteries in
this toy with alkaline batteries upon
purchase. Use alkaline batteries for
longer battery life.
• Open the fastener flap on
the back of the toy.
• Loosen the screw in the
battery compartment door
with a Phillips screwdriver.
• Lift to open the battery
compartment door.
• Insert three, size "AAA"
(LR03) alkaline batteries as
indicated inside the battery
compartment.
• Replace the battery
compartment door and
tighten the screw with a
Phillips screwdriver.
Do not over-tighten.
• Close the fastener flap.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove
exhausted batteries from this toy. Battery leakage and corrosion can
cause damage. Dispose of batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
"Battery Replacement" instructions are to be used.
• If removable rechargeable batteries are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before they
are charged.
• If you use a battery charger, it should be examined regularly for
damage to the cord, plug, enclosure and other parts. Do not use a
damaged battery charger until it has been properly repaired.
1.5V x 3
"AAA" (LR03)
SHOWN ACTUAL SIZE
Light and
Sound Box
Fastener Flap
Advertisement
