Dimensions And Clearances; To Reverse The Doors; Ambient Temperature; Leg Adjustment - LG GBB548BLCZH Owner's Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Dimensions and Clearances

• Too small of a distance from adjacent items
may result in the degradation of freezing
capability and increased electricity costs. Allow
over 50 mm of clearance from each adjacent
wall when installing the appliance.
A
G
B
C
-
Size
-
A type
B type
A
740 mm
730 mm
B
705 mm
705 mm
1720/1850
1720/1850
C
mm
mm
D
27 mm
27 mm
E
673 mm
673 mm
F
713 mm
703 mm
G
1230 mm
1230 mm
H
1200 mm
1190 mm

To Reverse the Doors

Your appliance is designed with reversible
doors, do that they may open from either the
left of right hand side to suit your kitchen
design.
NOTE
• However when you want to reverse the doors
your appliance in pairs, you must call to
service center. Revising the doors is not
covered by the warranty.
14
D
F
E
H
C type
700 mm
700 mm
1720/1850
mm
27 mm
673 mm
-
1230 mm
1160 mm

Ambient Temperature

• The appliance is designed to operate within a
limited range of ambient temperatures,
depending on the climate zone. Do not use
the appliance at a temperature exceeding the
limit.
• The internal temperature could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening
and so on.
• The climate class can be found on the rating
label.
Climate Class
SN (Extended
Temperate)
N (Temperate)
ST (Subtropical)
T (Tropical)
*Australia, India, Kenya
NOTE
• The appliances rated from SN to T are
intended to be used at an ambient
temperature between 10 ºC and 43 ºC.

Leg Adjustment

To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to
compensate for the uneven floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screws can be turned easily by tipping
the cabinet slightly.
Turn the leveling screws counterclockwise
to raise the unit, clockwise
EN
Ambient Temperature
Range ºC
+10 - +32
+16 - +32
+16 - +38
+16 - +43 / +10 - +43*
to lower it.

Advertisement

Table of Contents
loading

Table of Contents