Descent; Arrival - Honeywell FMZ Series Pilot's Manual

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

DESCENT

The FMS calculates a TOD point based on the destination elevation and
any entered altitude constraints. Once in descent, the FMS sets the
target altitude to the altitude selector or the next constraint, whichever
is higher.

ARRIVAL

When within 200 flight plan miles of the destination airport, the
ARRIVAL prompt is displayed at 6R, as shown in Figure 4--41. Pushing
the ARRIVAL prompt selects an arrival procedure or surface. The
ARRIVAL page is always accessed from the NAV INDEX.
Figure 4- -41
ARRIVAL Prompt on ACTIVE FLT PLAN 1/2
A28- - 1146- - 181
Operational Example
4-40 REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.