Chapter 3 - Operation; Basic Operation; Master Controller Mode - Honeywell ScanDome HTX-5000 Instruction Manual

Chapter 3 - Operation

3.1 BASIC OPERATION

Principle of joystick usage in the programming (editing) mode
Button or Joystick movement in menu
Joystick left or right
Joystick up or down
Joystick down
Zoom handle twist
SHFT + Joystick
Home or Off button

3.1.1 MASTER CONTROLLER MODE

As the DIP s/w position 8 Off, the joystick controller works as master controller. Position 8 ON, controller
will work as slave controller.
When the joystick controller is powered on, a password will be requested for accessing the joystick
controller.
HTX-5000 V x.xx
Password :_
HTX-5000 V x.xx
Password :_
ESC
S8 ON : Slave Controller mode
Go into the sub-menu items.
Execute the command(exit)
Change value.
Navigate through the menu items.
Navigate through the menu items.
Finish editing title.
Change value.(Increase / Decrease)
Enter editing title mode.
Turbo speed.
Escape from the menu without change.
Delete value or name of the field.
Master Controller mode
14
Function