Technical Data; Safety Instructions - Beta 1852 Instructions For Use Manual

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
INDUCTION HEATER
INTRODUCTION
This device generates high-frequency alternating current. The current passing through a heating coil creates an alternating
magnetic field which uses the principle of electromagnetic induction to vibrate electrons inside the heated material. The energy of
moving electrons is dissipated as heat, which heats the metal in the work field of the instrument. The more easily magnetisable
material, the more heat it creates. That is why the device easily heats nonferrous metals and their alloys, but has no effect on
glass, plastic, wood, textiles and other nonconductive materials.

TECHNICAL DATA

Name (type)
Input voltage
Input current
Power
PF
Load factor
Cover
Weight
Dimensions

SAFETY INSTRUCTIONS

GENERAL SAFETY RULES
Read all instructions in the manual carefully. Failure to follow these instructions may result in electric shock or
burns, fire and/or serious personal injury.
Users are responsible for installing and using the system in accordance with the instructions provided in this manual. The con-
tractor shall not be liable for damages resulting from improper use and handling.
The device may be operated by properly trained and appropriately qualified persons only. Do not operate the induction heater
BETA 1852 under the influence of drugs, alcohol or medication.
Bystanders and animals should be kept safely away when operating the device, even when cooling the heated material.
Avoid working in the rain, water and moist environments. Keep work area well ventilated and dry, clean and well lit.
When working with the device BETA 1852 always have a fully functional fire extinguisher within reach.
SAFETY RULES FOR PERSONAL PROTECTION
Persons with pacemakers or other metal or electronic surgical implants must not operate the device BETA 1852
and must keep a safe distance of at least 1 m from the device.
When working with the induction heater BETA 1852, do not wear any metal objects such as jewellery, rings,
watches, necklaces, identification tags, belt buckles, piercing and even clothing with metal parts such as metal
rivets, buttons and zippers. – The device BETA 1852 can heat up these metal objects quickly and cause serious
burns or clothing ignition.
12
BETA 1852
~230V, 50/60Hz
max. 7.5A
max. 1.75kW
0,99
50%@1.5kVA a 100%@1.0kVA
IP20
4,5 kg / 9,921 lb
200x140x75 mm
EN I