Technical Data - Beta 1839BRW Operation Manual And Instructions

OPERATION MANUAL AND INSTRUCTIONS
OPERATION MANUAL AND INSTRUCTIONS FOR WIRELESS CHARGING BASE (DUAL PAD) MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
WIRELESS CHARGING BASE. FAILURE TO COMPLY WITH THE SAFETY
STANDARDS AND OPERATING PROCEDURES MAY RESULT IN SERIOUS
INJURY.
Store the safety instructions with care and hand them over to the users.
PURPOSE OF USE
The wireless charging base can be used for the following purposes:
• Charging the batteries of the wireless lamps, Beta 1838SW and 1838POCKET;
• Charging the batteries of wireless chargeable
The wireless charging base must not be used for the following operations:
• must not be used for any applications other than recommended ones
WORK AREA SAFETY
Do not operate the wireless charging base in environments containing potentially explosive atmospheres, because
sparks may be generated, which can ignite the dust or fumes.
SAFETY
- Before use, check that the wireless charging base has not been damaged, and that no parts are worn.
- Do not force the electronice circuit. This can reduce the effectiveness of safety measures and increase operator risk.
- To clean the wireless charging base, use a dry cloth, and always disconnect the mains power supply.
BATTERY CHARGER USE AND CARE
- Check that both the power supply cable and the power supply are in good condition.
- Do not charge the lamp in humid or wet environments; do not expose it to the weather.

TECHNICAL DATA

ACCESSORIES
POWER SUPPLY DATA
PROTECTION DEGREE
OPERATING TEMPERATURE
WIRELESS CHARGING BASE (DUAL PAD)
smartphones.
QC3.0 18W USB fast charger
QC3.0 Type-C fast charging USB cable
1. Input: AC 100-240V 50/60Hz
Output: DC 12V 1.5A/9V 2A/5V 3A
IP20 IK07
-10°C ÷ +40°C
EN
5