LG 5401156193 Owner's Manual page 35

Problem
The air
conditioner
does not emit
cool air.
The fan speed
cannot be
The temperature
cannot be
Possible Causes
Air is not circulating
properly.
The room temperature
is too high.
Cold air is escaping
from the room.
The desired
temperature is higher
than the current
temperature.
There is a heating
source nearby.
Fan Mode is selected.
Outside temperature is
too high.
The Jet Mode, or Auto
Operation Mode is
selected.
The Fan Mode or Jet
Mode is selected.
Corrective Action
Make sure that there are no curtains,
weeks.
may take some time. In this case,
select the Jet Mode to cool the indoor
Make sure that no cold air is escaping
through the ventilation points in the
room.
Set the desired temperature to a level
lower than the current temperature.
Avoid using heat generators like
electric ovens or gas burners while
the air conditioner is in operation.
the air conditioner without cooling or
heating the indoor air.
Switch the operation mode to cooling
operation.
In some operation modes, you
an operation mode in which you can
In some operation modes, you cannot
operation mode in which you can
35