Table of Contents

Advertisement

Available languages

Available languages

Quick Links

RAD-141A
RAD-121A
RAD-123A
RADS-101A
(RADS-101A)

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for LG Comfort-Aire RAD-141A

  • Page 1 RAD-141A RAD-121A RAD-123A RADS-101A (RADS-101A)
  • Page 2: Table Of Contents

    Window-Type Air Conditioner Owner’s Manual TABLE OF CONTENTS FOR YOUR RECORDS Safety Precautions......3 Write the model and serial numbers here: Before Operation ......7 Model # Serial # You can find them on a label on the side of the product. Introduction ........8 Dealer's Name Symbols Used in this Manual ..8...
  • Page 3: Safety Precautions

    Safety Precautions Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. I Incorrect operation due to ignoring instructions will cause harm or damage. The seriousness is classified by the following indications. I Because of the weight of the product, it is recommended that you have a helper to assist in the installation.
  • Page 4 Safety Precautions I Operation Plug in the power plug Do not operate or stop the Do not damage or use an properly. unit by inserting or pulling unspecified power cord. out the power plug. • Otherwise, it will cause • It will cause electric shock or •...
  • Page 5 Safety Precautions Close all doors, windows and other outside Do not operate the air conditioner if you openings to the room. smell gas. • The air conditioner must be operated in a • It may cause explosion, fire, and burn. enclosed area to be most effective.
  • Page 6 Safety Precautions Operation Be cautious not to touch the Hold the plug by the hand Unplug the air conditioner sharp edges when if it will not be used for a (not the cable) when taking it out. installing. long period. It may cause injury.
  • Page 7: Before Operation

    Before Operation Before Operation Preparing for Operation 1. Plug in the power cord properly. 2. Use a dedicated circuit. Overloading the line could create a fire hazard. 3. Do not use an extension cord. See page 11 for more details. 4.
  • Page 8: Introduction

    Introduction Introduction Symbols Used in this Manual This symbol alerts you to the risk of electric shock. This symbol alerts you to hazards that could cause harm to the air conditioner. This symbol indicates special notes. Tip! Features WARNING: This appliance should be installed in accordance with National Electric Code.
  • Page 9: Electrical Safety

    Electrical Safety Electrical Safety Electrical Data 115V~ 230V~ Power cord may include a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button.
  • Page 10 Electrical Safety Electrical Safety WARNING: This appliance must be properly grounded. The power cord of this appliance is equipped with a three-prong grounding plug. To minimize the risk of electric shock, use the plug with a standard three-slot grounding wall power outlet. If the power outlet does not include a grounding slot, have a qualified electrician replace the outlet before you use the room air conditioner.
  • Page 11: Temporary Use Of An Adapter

    Electrical Safety Temporary Use of an Adapter We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections, use only a UL-listed adapter, available from most local hardware stores. Ensure that the large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection.
  • Page 12: Installation

    Installation Installation Type A:16EA Type B:3EA Type C:5EA (SCREW) (SCREW) (SCREW) Type D:2EA Type E:2EA Type F:2EA Type G:2EA (NUT) (FRAME CURTAIN) (SILL SUPPORT) (BOLT) Type H:1EA Type I:1EA Type J:1EA Type K:2EA (FOAM-STRIP) (UPPER GUIDE) (FOAM-PE) (FRAME-GUIDE) Type L:1EA Type M:1EA Type N:1EA Type O:1EA...
  • Page 13: Window Requirements

    Installation Window Requirements Size This room air conditioner is 27" to 39" designed for installation in standard 16" min Sill (With frame curtain) double-hung windows with actual Offset opening widths from 27" to 39". " to 1 " The upper and lower window sash Sill must open sufficiently to allow a Exterior...
  • Page 14: Preparation Of Chassis

    Installation Preparation of Chassis 1. Remove the screws which fasten the cabinet Shipping at both sides and at the back. Screws Use a long screwdriver and installing the Tip! screws will be easier. 2. Slide the unit from the cabinet by gripping the base pan handle and pulling forward while bracing the cabinet.
  • Page 15: Unit Installation

    Installation Unit Installation Caution: During the following step, hold unit firmly until window sash is lowered to top channel behind side panel frames. Personal injury or property damage may result if unit falls from window. 1. Open the window. Mark a line on center of the window stool(or desired air conditioner location).
  • Page 16 Installation 9. Attach each Frame Curtain the window sash using screws (Type C).(See Figure 6) Type C : DO NOT DRILL A HOLE IN THE Tip! BOTTOM PAN. The unit is designed to operate with approximately 1/2" of water in bottom pan. Figure 6 10.
  • Page 17: Operating Instructions

    Operating Instructions Operating Instructions Location and Function of Controls CAUTION: If you turn off the air conditioner or switch from cooling to the fan, wait at least 3 minutes before setting to cooling again. - Turns air conditioner off. O ff Me d Fa n - Med speed fan operation without cooling.
  • Page 18: Remote Control Operations

    Operating Instructions Remote Control Operations...
  • Page 19: Remote Control Remote Controller

    Low,Mid and High...
  • Page 20: Additional Features

    Operating Instructions Additional Features Air Direction The direction of air can be controlled wherever you want to cool by adjusting the horizontal louver and the vertical louver. HORIZONTAL AIR-DIRECTION CONTROL The horizontal air direction is adjusted by rotating the vertical louver right or left. VERTICAL AIR-DIRECTION CONTROL The vertical air direction is adjusted by rotating the horizontal louver forward or...
  • Page 21: Maintenance And Service

    Maintenance and Service Maintenance and Service Air Filter Check the air filter at least twice a month to see if cleaning is necessary. Trapped particles in the filter can build up and block the airflow, reducing cooling capacity and causing an accumulation of frost on the evaporator. To clean the air filter: Lift the inlet grille.
  • Page 22: How To Remove The Front Grille

    Maintenance and Service How to Remove the Front Grille 1. If you want to pull out the filter upward, open the inlet grille slightly. Turn inside out the front grille. Disassemble the inlet grille from the front grille with separating the hinged part by inserting a "...
  • Page 23: Common Problems And Solutions

    Maintenance and Service Common Problems and Solutions Before Calling for Service If you have problems with your air conditioner, read the following information and try to solve the problem. If you cannot find a solution, turn off the air conditioner and contact your dealer.
  • Page 24: Troubleshooting

    Maintenance and Service Troubleshooting The air conditioner ma y be operating abnormally when: Problem Possible Causes What To Do The air conditioner is Make sure the air conditioner plug is unplugged. pushed completely into the outlet. The fuse is blown/circuit Check the house fuse/circuit breaker is tripped.
  • Page 25 Owner s Manual...
  • Page 26 Manual del usuario del acondicionador de aire tipo Ventana TABLA DE CONTENIDOS PARA SUS ARCHIVOS Precauciones de Seguridad ..27 Escriba aquí el modelo y número de serie: Antes de poner en marcha ..31 Modelo n°: Serie n°: Introducción ........32 Puede encontrar los números en la etiqueta de la parte Símbolos Utilizados en lateral del producto .
  • Page 27: Precauciones De Seguridad

    Precauciones de Seguridad Precauciones de Seguridad Para prevenir tanto lesiones al usuario u otras personas como daños materiales, es preciso seguir estas instrucciones. La incorrecta operación del aparato como consecuencia de ignorar las instrucciones provocará daños o lesiones. I A cause del peso pesado del producto, se recomienda que usted tenga a un ayudante a participa en la instalación.
  • Page 31: Antes De Poner En Marcha

    Antes de poner en marcha Antes de poner en marcha...
  • Page 32: Introducción

    Introducción Introducción Símbolos Utilizados en Este Manual Este símbolo lo advierte de un peligro de accidente por corriente eléctrica. Este símbolo lo adiverte de un peligro que pueda causar un daño del ventliador. Este símbolo significa condicciones especiales. CONSEJO Características ADVERTENCIA : Este aparato debería instalarse de acuerdo con las normas del Código Eléctrico Nacional.
  • Page 33: Datos Electricos

    Seguraida Electrica Seguraidad Electrica USO DE CORDONES DE EXTENSION Debido al potencial de peligro a su seguridad bajo ciertas circunstancias recomendamos encaredidamente no utiliar cordones de extension. Sin embargo, si usted decide usar un cordon de extension, es absolutamente necesario que este sea un cordon listado bajo UL de tres espigas con conexion a tierra calificado 15A, 125V.
  • Page 34: Seguridad Eléctrica

    Seguridad Eléctrica Seguridad Eléctrica Este equipo debe estar puesto a tierra debidamente. El cable de alimentación está equipado de una toma de tierra con tres pins. Para minimizar el peligro de una lesión por corriente eléctrica, utilice una toma con enchufe de tierra estándar con tres contactos.
  • Page 35: Uso Transitorio De Un Adaptador

    Seguridad Eléctrica Uso Transitorio de un Adaptador Debido a eventuales peligros de seguridad no recomendamos en absoluto el uso de un adaptador. Sólo para una conexión transitoria se puede usar el adaptador clasificado como UL que está a disposición en la mayoría de las tiendas de productos eléctricos.
  • Page 36: Instalación

    Instalación Instalaci ó n Tipo A:16 EA Tipo C:5 EA Tipo B:3 EA (TORNILLO) (TORNILLO) (TORNILLO) Tipo E:2 EA Tipo D:2 EA Tipo F:2 EA Tipo G:2 EA (TUERCA) (PANEL GUÍA) (SOPORTE DE ALFÉIZAR) (TORNILLO) Tipo H:1 EA Tipo I:1 EA Tipo J:1 EA Tipo K:2 EA (TIRA DE GOMA)
  • Page 37: Requerimientos De Ventana

    Instalación Requerimientos de Ventana Tamaño 27" a 39" Este ventilador de casa está construido para ventanas estándar de 16" min Banqueta dos alas con la extensión real de Compensación apertura de 27" a 39". El ala superior " to 1 "...
  • Page 38: Preparación De La Carcasa

    Instalación Preparación de la Carcasa Tornillos para 1. Remueva los tornillos cuales sujetan transporte el gabinete a ambos lados y en la parte de atrás. Use un atornillador largo. Así será CONSEJO más fácil instala los tornilos. 2. Deslice la unidad fuera del gabinete tomando el agarradero de la bandeja y hale hacia el frente mientras mantiene el gabinete.
  • Page 39: Instalación De La Unidad

    Instalación Instalación de la Unidad Precautión: En las siguientes instrucciones, sostenga la unidad firmemente hasta que la parte corrediza de la ventana descanse sobre la parte superior del canal y por detrás del marco de los paneles corredizos. Puede haber lesiones o daños si la unidad se cae de la ventana.
  • Page 40 Instalación 9. Adjunte cada Panel Guía a cada lado de la ventana usando tornillos (Tipo C). Tipo C (Ver Figura 6) No perfore la charola del fondo. CONSEJO La unidad está diseñada para operar con aproximadamente 1/2" de agua en la charola del Figura 6 fondo.
  • Page 42 • • • • á • • • • • Low,M •...
  • Page 43: Instrucciones De Funcionamiento

    Instrucciones de funcionamiento Control Remoto PRECAUTIÓN: El mando a distancia no funcionará correctamente si una luz fuerte hace contacto con el sensor del aire acondicionado o si hay obsáculos entre el mando a distancia y el aire acondicionado. Enecndido/Apagado • Para ENCENDER el sistema presione el botón, y para APAGARLO presione el botón otra vez. •...
  • Page 44: Adicionales E Características

    Instrucciones de funcionamiento Adicionales e Características La dirección del aire La dirección del aire puede ser controlada cuando usteddesee enfriar, ajustando la palanca vertical y la palanca horiziontal. • CONTROL DE LA DIRECCIÓN HORIZONTAL DEL AIRE La dirección horizontal del aire es ajustada rotando lapalanca vertical hacia la derecha o hacia la izquierda.
  • Page 45: Mantenimiento Y Servicio

    Mantenimiento y servicio Mantenimiento y Servicio Filtro de Aire Revise por lo menos dos veces al mes si no es necesario limpiar el filtro de aire. Las partículas detenidad se pueden acumular en el filtro impidiendo el flujo del aire, limitando el rendimiento de enfriamiento y causando la acumulación de hielo en el evaporador.
  • Page 46: Como Remover La Parilla Frontal

    Mantenimiento y servicio Como Remover la Parilla Frontal 1. Si usted desea sacar el filtro por arriba, abra la rejilla de entrada ligeramente. Vuelte la rejilla frontal. Separe la parte engoznada insertando la punta del destornillador de tipo " " _ para desensamblar la rejilla de entrada desde la rejilla frontal.
  • Page 47: Problemas Y Soluciones Habituales

    Mantenimiento y servicio Problemas y Soluciones habituales Antes de Llamar el Servicio de Asistencia Técnica Si tiene problemas con su ventilador, lea las informaciones siguientes y trate de resolver el problema. Si no puede encontrar la solución, desconecte el ventilador y diríjase a su suministrador.
  • Page 48: Resoluci Ó N De Problemas

    Mantenimiento y servicio El acondicionador de aire puede estar funcionando anormalmente cuando: Problema Causas posibles Qué hacer El aire acondicionado está desconectado . El fusible está quemado/el interruptor de energía se ha bloqueado. Falta de energía. El flujo de aire esta restringido.
  • Page 49 Manual del Propietario...
  • Page 50 Specifications and performance data subject to change without notice. HEAT CONTROLLER, INC. 1900 WELLWORTH AVENUE • JACKSON, MICHIGAN 49203 THE QUALITY LEADER IN CONDITIONING AIR P/No Printed in China...

Table of Contents