Performance Inspection - Huawei ME936 Acceptance Inspection Manual

Lte m.2 module

Hide thumbs Also See for ME936:

HUAWEI ME936 LTE M.2 Module

Acceptance Inspection Guide

2.3 Performance Inspection

Testing tools: USB cable, development kit and PC

Testing system: Windows 8/Windows 8.1

The following is the procedure:

Step 1 Plug the module onto the development kit, and then use the USB cable to connect

the development kit to the PC.

Step 2 Enter Program Manager as shown in the following figure.

Issue 03 (2017-12-11)



Check whether the information on the label of an ME936 is consistent with the

corresponding label shown in Figure 2-4 . There are two kinds of labels for ME936 and you

can find one that is corresponding to the label shown in Figure 2-4 , which is the general

version. If the label is customized, please refer to the approval sheet.

Use a 2D barcode scanner to read the 2D barcode and check whether the number read



from the barcode is consistent with the IMEI number printed on the label.

Huawei Proprietary and Confidential

Acceptance Inspection

Table of Contents