Table of Contents
Advertisement
18°C for freezer temperature).
To enter Smart Eco: Click "option" until it flickers and
then click "OK" to enter this function.
To deactivate Smart Eco: Click "option" until it goes
to Smart ECO, click "OK" to quit this function and the
light goes off.
FAST COOLING: Activate Fast Cooling mode to start
an additional pulse for a fast freezing of the fridge
compartment. The function is activated and
confirmed by the switching on of the dedicated LED
icon.
To enter Fast Cooling: Click "option" until it flickers
in "Fast Cooling" and then click "OK" to enter this
function.
To deactivate Fast Cooling: Click "option" until it goes
to "fast cooling" and then click "OK" to deactivate
this function.
FAST FREEZING: Activate Fast Freezing to rapidly
freeze big quantities of food keeping intact
nutritional food properties. When the light in Fast
Freezing goes off and the freezer temperature goes
back to the value before fast freezing. When Fast
Freezing time is up (26 hours), it deactivates
automatically. When it goes to Vacation, Fast
Freezing stops.
To enter Fast Freezing: Click "option" until it flickers
in "Fast Freezing" and then click "OK" to enter this
function.
To deactivate Fast Freezing: Click "option" until it
goes to "fast freezing" and then click "OK" to quit
this function.
VACATION: In case of long stops, the Vacation
function can be used. This function deactivates the
fridge compartment, while leaving the freezer on.
Ensure that there is no food inside the fridge
compartment before using this function. The
function is activated and confirmed by the switching
on of the dedicated LED icon. The light in Vacation
goes off and the refrigerator temperature goes back
to the value before Vacation.
Vacation quits under functions of Smart ECO and Fast
Cooling.
To enter Vacation: Click "option" until it flickers in
"Fast Freezing" and then click "OK" to enter this
function.
To deactivate Vacation: Click "option" until it goes to
"Vacation" and then click "OK" to quit this function.
POWER OFF MEMORY: Refrigerator can
automatically keep all the setting in case of power
off. When the unit is plugged in again, the
refrigerator will run with the setting before power
off.
POWER-ON DELAY: To prevent harm to the
refrigerator in case of sudden power cut and power
on, the unit does not start immediately if the power
off time is less than 5 minutes.
FREEZER OVER-TEMPERATURE ALARM (only in case
of power on): When the freezer temperature is
higher than 10°Cat the first time connected to
power, the symbol light of the freezer chamber goes
on and the number representing temperature
flickers.
Press any button or wait for 5 seconds, flickering
stops and it goes back to the temperature that was
set.
REFRIGERATOR DOOR OPENING ALARM: When the
refrigerator is open over 3 minutes, the buzzer will
buzz. Close the door or press any button to stop the
alarm, but for the latter, the alarm will go off again
after 3 minutes.
SENSOR FAULT ALARM: When it shows "E0", "E1",
"E2" or other abnormal symbols, it means sensor
faults and the refrigerator needs repair.
TOP FEAUTRED VERTICAL DISPLAY
(Only on some models)
ALWAYS FRESH Button: On models with Always
Fresh Technology press the "Always Fresh" button to
activate the function.
SETTING Button: Press "SETTING" to change the
temperature.
When button is pressed for the first time: You can
change refrigerator temperature with ▲ PLUS
Button and ▼ MINUS Button.
When button is pressed for the second time: You can
change refrigerator temperature with ▲ PLUS
Button and ▼ MINUS Button.
On models with Always Fresh Technology press the
"Setting" button for 3 seconds to lock and unlock the
display.
ON/OFF Button: To turn on Refrigerator Press
ON/OFF button for 3 seconds. To turn off
Refrigerator: Press ON/Off button for 3 seconds.
Stand-by Mode: To save energy is possible to
activate Stanby Mode. The refrigerator will work in
normal state and all leds will turn OFF
To enter Stan-by Mode: Press ON/OFF button for 1
second.
To deactivate Stan-by Mode: Press ON/OFF button
for 1 second. Fridge back to normal operation.
ECO MODE Button: Press Eco Mode button to set
temperatures of the fridge in max. energy efficiency
conditions (+5°C for fridge temperature, -18°C for
freezer temperature). If you want to exit the ECO
mode function, you need to press the Eco Mode
button again and the refrigerator temperature turns
back to normal operation.
HOLIDAY Button: In case of long stops, the Holiday
function can be used. This function deactivates the
fridge compartment, while leaving the freezer on.
Ensure that there is no food inside the fridge
compartment before using this function. The
function is activated and confirmed by the switching
27
Advertisement
Table of Contents
