Setting Of Devices So That All Assembly Holes Are In Common Axes 5; Move Modules To Each Other At Approx. 5 Mm 5; Connecting Devices With Each Other Via Delivered Fasteners 5; Levelling Of Device Set Via Level Lines 5 - Igloo LUZON Assembly Instructions Manual

DEVICE SERIES ASSEMBLY INSTRUCTIONS
TYPE: LUZON B
DOCUMENT NO:
NO: 7,8,9,10
7
Setting of devices so that all assembly holes
are in common axes
9
Connecting devices with each other
via delivered fasteners
IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl
LUZON DEVICE SERIES ASSEMBLY INSTRUCTIONS
REVISION
ITEM DATE ITEM
A D
B E
C F
8
Move modules to each other at approx. 5 mm
10
Levelling of device set via level lines
• At the place of connection, adjust height from
the front
• and back, screwing on or out legs in the base.
• Adjust every module via level line at places
shown in fig.
DATE PAGE: 5/15
DATE of 1st issue:
26.05.2019
en
5