Table of Contents
Advertisement
DEVICE SERIES ASSEMBLY INSTRUCTIONS
TYPE: LUZON
DOCUMENT NO:
NO: 4,4.1,4.2,4.3,4.4
4
Preparation of devices for assembly in series
•
Arrange the devices connected in series according to their target configuration, keeping the distance at the
connection point of 20 cm.
•
Remove all delivered packed components such as lamps, glass sides, shelves, etc. from the inside of the
device body.
•
Unscrew legs by slightly tilting the device from the front, remove the base board and then screw in the legs
again. Remove the base board from the back in the same manner
4.
1
Depacking of shelves, glass panels,
screens and tops
4.
3
Pulling of fans
IGLOO
Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl
LUZON DEVICE SERIES ASSEMBLY INSTRUCTIONS
REVISION
ITEM
DATE
ITEM
A
D
B
E
C
F
4.
2
Unscrewing an intake
4.
4
Turning wind braces
PAGE: 3/15
DATE
DATE of 1st issue:
26.05.2019
en
3
Advertisement
Table of Contents
