Making Sealing On Module Connections 13; Arrangement Of Device Shelves 13 - Igloo LUZON Assembly Instructions Manual

DEVICE SERIES ASSEMBLY INSTRUCTIONS
TYPE: LUZON PG
DOCUMENT NO:
NO: 31,32
31
Making sealing on module connections
32
Arrangement of device shelves
IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl
LUZON DEVICE SERIES ASSEMBLY INSTRUCTIONS
REVISION
ITEM DATE ITEM
A D
B E
C F
The exhibition shelves consist of three types of
components:
- Exhibition shelf 305 [detail 23]
- Additional part [detail 24]
- Connector [detail 25]
• Arrangement of shelves from the right side.
• Put the shelf 305 [detail 26] first. Next, place
shelves 305 as the so-called fin of the previous
shelf [detail 27]. Set an appropriate addition to the
module length as the last in a given module.
• Place a connector [detail 28] under the addition of
previous module [detail 29] and shelf 305 of the
next module
• 32 [detail 30]
PAGE: 13/15
DATE
DATE of 1st issue:
26.05.2019
en
13