MAINTENANCE & CARE
22 HANDLE REMOVAL
Carefully pry off handle button (22A) using a small screwdriver or blade. Using
a 3 / 32 " Allen wrench, loosen set screw (22C) and remove Lever Handle (22B).
Reassemble handle by reversing steps.
23 CARTRIDGE REPLACEMENT
Turn off water supplies and relieve pressure before working on your faucet.
Remove handle – see above. Remove the Dome Cap (23A 3A 3 ) by unscrewing
counter clockwise. Using pliers, unscrew the Retainer Ring (23B). Carefully
remove the Cartridge (23C) by pulling it straight up and out. Reassemble
faucet by reversing steps.
24 DIVERTER REPLACEMENT
(For products with side spray). If the side spray fails to work properly the diverter
mechanism may be clogged with debris or may need replacing. To check and/or
replace Diverter (24A), shut off water supply and relieve pressure before working
on your faucet (see step 2). Remove handle (see step 22) and Dome Cap (24B)
and carefully lift up the Spout Assembly (24C). The Diverter Mechanism (24A)
is located on the backside of Inner Faucet Body (24D). Carefully remove the
Diverter Mechanism (24A) and check for debris. Clean or replace the Diverter
Mechanism (24A). Reassemble faucet by reversing steps.
For all Handles and decorative ﬁ nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
For Toll-Free Pfaucet information call
or visit www.pricepﬁ ster.com
• Installation Support
• Care and Warranty Information
Replacement parts may be available at the store where you purchased
When replacement parts are not available, please write or call Price
Pﬁ ster Consumer Service.
Always turn off water and relieve pressure before working on your
NOTE: Trim Care