Huawei FusionServer Pro 2288H V5 Technical Manual page 73

Huawei FusionServer Pro 2288H V5 Server
Technical White Paper
Category
Network
Issue 12 (2020-04-20)
Specifications
For details about the RAID controller card, see
Huawei V5 Server RAID Controller Card User
Guide.
● Supports SAS HBA cards or SAS RAID controller card
(with a 1 GB, 2 GB, or 4 GB cache) to improve
storage performance and data security.
NOTE
If the BIOS is in legacy mode, the 4K drive cannot be used as
the boot drive.
Supports expansion capability of multiple types of
networks.
● LOM
– Supports two 10GE optical ports and two GE
electrical ports via the NIC chip integrated on the
mainboard.
– Supports two 10GE electrical ports and two GE
electrical ports via the NIC chip integrated on the
mainboard.
– The LOM ports support NC-SI, WOL, and PXE.
● FlexIO card
– Supports on-demand configuration.
– Supports a variety of FlexIO cards. Use the
Intelligent Computing Compatibility Checker
to obtain information about the specific FlexIO
cards supported.
NOTE
● The electrical ports provided by NICs and FlexIO cards
cannot be connected to PoE devices (such as a switch with
PoE enabled). Connecting such a port to a PoE device may
cause link communication failure or even damage the NIC.
● Forcibly powering off a server will cause intermittent NC-SI
disconnection and disable the WOL function of the LOM
ports. To restore the NC-SI connection, refresh the iBMC
WebUI.
Copyright © Huawei Technologies Co., Ltd.
6 Product Specifications
67