Layout - HDL -MTIRW Product Manual

Storage Relative Humidity: 10% - 93%


1.3 Layout

Reset
USB interface
Functions：

IR emitting and IR learning：IR code emitting and learn other remoter's IR code.

Reset：Can restart the Remoter Controller.

USB interface：battery charging and update firmware for Remoter Controller.

Switch：control the remote controller's state. The LCD will darken when there is no
operation more than 10s; The LCD will enter into standby state when there is no
operation more than 13s. In the off state, Press any button also can start the Remoter
Controller.

Change button, change between home page and panel page.

Return button, return to the previous step.

Control button: those No.1 to No.8 buttons can control corresponding buttons in HDL
panel. NO.9 and.0 are invalid.

： up and down to change parameters, and can select HDL panel when you control,
there are 6 kinds of panel can be selected.

：set parameters , and select page when you control, some panel has many pages,
each panel has different pages and different buttons, you can select by those two
buttons.

OK: confirm button, after you set parameters, you should press OK to confirm.
For IR code emitting and IR learning
154.2
60
MTIRW IR/RF Remote Controller
LCD display
Change button
Return button
Function selection
Control buttons
24.2
switch of remoter
2