Advertisement
STEP
CONNECT THE HOSE TO RX-TANK
•
Submerge the rX-Tank in
your pool to expel all air.
You will need to fill
each chamber in the
halo by squeezing each
chamber until there are
no air bubbles inside. Each
chamber needs to be filled
with water one at a time.
rX-Tank_manual_V12.indd 7
4
•
Connect the hose
(with the hose weight
closest to the end) to the
Flexible Hose Connector on
your rX-Tank. Ensure the
hose is submerged and
free of air.
•
Connect the other end
of the hose to the Smart-
Skim or Auto Skim upgrade
(see setup on page 3)
ensuring the end of the
hose is submerged and
free of air. Install the Anti
Vortex Disc (optional) to
stop air from entering the
system when the water
level is low.
7
14/10/19 1:20 pm
Advertisement
