Advertisement
Fit the Vacuum Control Valve (2 options)
Smart-Skim (comes standard)
Insert the Smart-Skim into the adaptor fitting,
then attach to your Vacuum Plate. Depending
on the Vacuum Plate your pool uses, you may
have to use a different skim adaptor – we've
included three for you to choose from.
You know you're using the right one when there
is a tight fit. See our Kreepy Krauly website if
you need help.
TIP:
For Poolrite plates, use the first fitting,
threading from the bottom (tapered side up)
until it sits flush with base of the plate. This
will ensure your valve opens freely.
NOTE:
To remove, ensure the pump is off
and grasp from the bottom of the Smart-Skim,
pulling up. (Note: Not from the hose or spring).
Combined Vacuum Plate and Auto Skim Valve
(optional upgrade)
Your pool shop would have already assisted you
in selecting the correct replacement for your
pool's existing vacuum plate. To assemble, place
the Auto Skim Valve into the opening in the
new Vacuum Plate. Attach the Anti-Vortex Disc
over the valve inlet. Place the entire unit in the
skimmer box.
NOTE:
TIP:
The Anti-Vortex Disc stops the slurping sound.
rX-Tank_manual_V12.indd 5
OR
A Vacuum Plate Clamp can stop your vacuum plate moving.
used with most
vacuum plates
used with Polyplastics
190 & 210 standard
used with Polyplastics
SK1000 (rectangular)
5
14/10/19 1:20 pm
TIP
(taper
your v
NO
of the S
Advertisement
