Advertisement
STEP
PREPARE YOUR POOL
If your pool is clean, balanced and algae-free, you're ready to get started.
First, clean the skimmer and pump basket.
a.
b.
Check the water level.
Brush down the sides of your pool.
c.
Next, make sure the return jets are facing downwards.
d.
e.
Then, backwash or clean your cartridge filter.
f.
Now turn off the pump.
TIP:
Before installing your rX-Tank, check the following:
Vinyl-lined pool – Check for signs of deterioration or damage
to the liner. Remediate before installation.
Tiled pool – Check and repair any loose tiles.
STEP
ASSEMBLE THE CONNECTOR
•
Attach the Flexible Hose Connector
(the incredibly bendy small hose) to the
top opening of your rX-Tank. This should
fit snuggly, if not, rotate 180°.
4
rX-Tank_manual_V12.indd 4
1
2
14/10/19 1:20 pm
Advertisement
