Troubleshooting Guide - Venturer PLV16070 Instruction Manual

trouBleShootinG GuiDe

SYMPTOM
Unit does not work.
No picture on the TV
screen.
No sound.
Remote control does not
work.
Can not watch a bilingual
TV program in its secondary
language.
weak signal or channel not
available.
TV can not receive signal
from a connected Cable
box or Satellite box.
Can I watch TV while
holding the TV, or while
traveling in a vehicle ?
Specifications and external appearance are subject to change without notice.
dO NOT RETURN THIS PROdUCT TO THE STORE
CAUSE (AND REMEDY)
• Unplug the AC power cord and plug it back in.
• Check that the three-way switch is slid to "ON" position.
• Choose different channels on the TV set until the picture
appears.
• Make sure the TV sound is not muted.
• Make sure the batteries are inserted correctly.
• Replace the batteries if they are exhausted.
• Remove any obstacles between the remote control.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Make sure you have correctly selected the appropriate audio
setting (see p. 11). Please note that not all TV stations broadcast a
secondary language.
• Try to reposition the antenna.
NOTE: Optimal reception of over-the-air TV broadcasts is typically
obtained using an external fixed antenna. Orientation and location
of the antenna is typically critical for best results - if using indoors,
you may find that placement of the antenna near a window, or in
an elevated location, improves performance.
• Confirm that a Coaxial cable is connected properly to the TV and
the Cable or Satellite box. Ensure that your Cable or Satellite box
is configured to output a TV signal over a Coaxial cable.
• No - ATSC TV signals can't be received satisfactorily while TV is in
motion. The TV and Antenna should be stationary and positioned
for optimal reception. Note: the Car Power Adapter is provided
specifically for "tail-gating" usage.
need More help?
Please visit online help at
http//www.venturer.com
- 15 -
Printed in China
811-160791W010