Battery Installation; Attaching The Belt Clip; Charging The Batteries - Panasonic KX-TGP700 Operating Instructions Manual

• The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become disconnected.
• Fasten the AC adaptor cord to the cord holder.
• Use only the included Panasonic AC adaptor.

5.2.1 Battery Installation

Open the battery cover, insert the batteries, and close the cover as indicated below.
For KX-TPA70

5.2.2 Attaching the Belt Clip

You can attach the handset to your belt by following the steps below.
1. Push the clip onto the back of the handset.
2. Insert the clip into the designated notches in the handset.
For KX-TPA70

5.2.3 Charging the Batteries

At the time of shipment, the batteries are not charged. Please charge the batteries for
about 6 hours before using the handset for the first time.
PQLV219xx
5.2.1 Battery Installation
For KX-TPA73
For KX-TPA73
39