M.2 Solid-State Drive - Lenovo ThinkCentre M75n User Manual

M.2 solid-state drive

Prerequisite
Before you start, read Appendix A "Important safety information" on page 77 and print the following
instructions.
Replacement procedure
1. Turn over the computer so that the bottom cover is facing up.
2. Remove the bottom cover. See "Bottom cover" on page 51.
3. Remove an M.2 solid-state drive.
Note: A thermal pad might cover the M.2 solid-state drive. To access the M.2 solid-state drive, peel off
the thermal pad first.
4. Install an M.2 solid-state drive. For more information about the corresponding slot for the M.2 solid-state
drive, see "System board" on page 5. Cover the M.2 solid-state drive with a thermal pad if you have
removed one.
5. Reinstall the removed parts. Turn over the computer so that the bottom cover is facing down.
6. Reconnect the external cables and power adapter to the corresponding connectors on the computer,
and then reconnect the power cord to the electrical outlet.
54
ThinkCentre M75n User Guide