Advertisement
Quick Links
CONTENTS:
(1) Rear Bumper
(2) Bumper Brackets
(2) Mesh Grille Inserts
(2) Fog Lights - Optional
(1) Fog Light Harness - Optional
(2) Bolt Plates
(4) M12x1.75x40mm Bolts
(4) M12 Flat Washers
(4) M12 Lock Washers
(4) Rear Camera Rubber Plugs
(2) LED License Plate Lights
(4) Splice Connectors
(10) Zip Ties
STEP 1 //
Unplug the factory license plate light harnesses,
and the trailer plug connector and pull away from the bumper.
If equipped unplug and remove the factory backup sensors.
STEP 2 //
Push the red tab outwards, and press the black
tab to unplug the license plate light harness. Unplug both
sides.
Tubular Rear Bumper
(09-18 RAM)
TOOLS REQUIRED:
15, 16, 18, 21mm Sockets
3/8" or 1/2" Ratchet & Extensions
10mm Wrench
Trim Panel Removal Tool
Flat Head Screw Driver
Allen Wrench
STEP 3 //
From underneath the vehicle, locate and remove
the (2) 21mm bolts from the upper frame rail mount. Do the
same on the opposite side. **Note: Factory hardware will be
reused.
STEP 4
// From under the vehicle, remove the (2) 21mm
bolts from the lower frame rail mount. Do the same on the
opposite side. Carefully remove the bumper from the vehicle.
**Note: Factory hardware will be reused.
R110299
R110300
Advertisement
Related Manuals for Barricade R110299
Summary of Contents for Barricade R110299
- Page 1 R110299 R110300 Tubular Rear Bumper (09-18 RAM) CONTENTS: TOOLS REQUIRED: 15, 16, 18, 21mm Sockets (1) Rear Bumper 3/8” or 1/2” Ratchet & Extensions (2) Bumper Brackets 10mm Wrench (2) Mesh Grille Inserts (2) Fog Lights - Optional Trim Panel Removal Tool...
- Page 2 STEP 5 // STEP 8 // Using a flat head screw driver, push in the metal If choosing not to use the LED fog lights, install tabs on the trailer plug connector and remove from the factory the (2) mesh grille inserts into the bumper using the (2) M6 bumper.
- Page 3 STEP 11 // STEP 14 // Optional Light Wiring: Attach the bumper mount to the new bumper Connect the (2) LED using the (1) bolt plate, and (2) M12x1.75x40mm bolts, lock Fog lights into the supplied harness. Be sure to zip tie the washers, and flat washers on each side.