Table of Contents
Advertisement
1-2. Board Installation
1-2-1. BKSR-2025
General Information
. The BKSR-2025 can be inserted into slots No.2 to No.5 of
VSR-2000A.
n
To attach multiple boards, attach them from the No.1
slot in order.
VSR-2000A (Rear side)
. Stick the slot label supplied with the BKSR-2025 onto the
connector panel after the board installation to prevent the
incorrect insertion when the board replacing.
. Do not open the slot to keep the air-cooled effect of VSR-
2000A. Be sure to attach the blank panel to vacant slot.
. It is not necessary to adjust after board installation/re-
placement.
Procedures
1. Turn off the power switch of the VSR-2000A.
2. Remove the four screws, and remove the two blank pan-
els of any slot.
n
Keep the removed blank panel.
Blank panels
1-2 (E)
Slot No.1
VSR-2000A
BVTT
3 x 6
3. Insert the BKSR-2025 to the slot. Push the handle of the
board in the direction of installing, and insert it in the
mother board completely.
4. Secure the BKSR-2025 with the four screws securing
the blank panel.
5. Stick the slot label supplied with the BKSR-2025 onto
the connector panel.
The label's number is the same as the slot number which
the board has inserted.
BKSR-2025
n
To remove the BKSR-2025, hold the handle of the board
and pull it in the direction of removing and remove the
board to the front.
BKSR-2025
Handles
Installing
Removing
BVTT
3 x 6
Slot label
BKSR-2025/2035
Advertisement
Table of Contents
