Board Installation - Sony BKMA-7031 Installation Manual

1-2. Board Installation

1-2. Board Installation
General information
. The BKMA-7031 can be inserted into any slot exept slot
No.6 of MAV-70XGI.
MAV-70XGI (Rear side)
. Stick the slot label supplied with the BKMA-7031 onto
the connector panel after the board installation to prevent
the incorrect insertion when the board replacing.
. Do not open the slot to keep the air-cooled effect of
MAV-70XGI. Be sure to attach the blank panel to
vacant slot.
. It is not necessary to adjust after board installation/
replacement.
1-2 (E)
Procedures
1. Turn off the power switches A and B of the MAV-
70XGI.
2. Remove the two screws, and remove the blank panel
of any slot.
n
Keep the removed blank panel.
Slot No.6
3. Insert the BKMA-7031 into the slot, and turn the board
levers in the direction of the arrow 1 to connect the
board to the mother board securely.
MAV-70XGI
BVTT3 x 6
Board lever
Install
Remove
1
2
BVTT3 x 6
Blank panel
BKMA-7031
Board lever
1
2
BKMA-7031