Aircraft/terrestrial high power sd/hd video transmitter (35 pages)
Summary of Contents for Vislink InCam-HG
Page 1
Vislink, Waterside House, Earls Colne Business Park, Colchester, Essex, CO6 2NS, UK Telephone: +44 (0)1442 431300 ● Facsimile: +44 (0) 1494 775356 ● Email: sales@vislink.com ● Website: www.vislink.com Company Registered in England & Wales no. 10523708 ● VAT registration no. GB 260 012 169...
Page 2
Document Disclaimer The information contained in this manual remains the property of Vislink and may not be used, disclosed or reproduced in any other form whatsoever without the prior written permission of Vislink. Vislink reserves the right to alter the equipment and specification appertaining to the equipment described in this manual without notification.
Template Operators Manual General Information 1.5. Maximum RF Power Density Limits The RF Radiation Power Density limit figure recommended by Vislink is based upon guideline levels published in: a. IEEE standard C95.1 1999 - IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
1080i and 720p with camera control. The unit utilizes user-changeable RF modules for rapid, in-field, swap outs. 2.1. InCam Matrix The InCam-HG unit comprises of two parts with the main chassis and interchangeable RF unit, meaning the unit is flexible to changing needs. View- Battery...
5.5. Recall Default Settings Recalling default settings is useful when first testing InCam with the Vislink UltraReceiver. When recalling defaults on the InCam, you need to power cycle the unit before setting the TX frequency and turning on the modulator.
7.1. Camera Hardware The InCam-HG requires the Grass Valley LDX-86N 4K-RF camera for 4K wireless transmission, The InCam-HG interfaces with all Grass Valley LDX cameras with up to 1080p standards. Please refer to Grass Valley camera manuals for License options and Video Format limitations.
Template Operators Manual InCam Setup 7.3. Video Format Configuration The Video Format requires setting in the camera menu and InCam-HG menu Camera Menu: • Installed Level> User3 • Production Setup> Video Mode> InCam-HG Menu: • Encoder> Settings> Format 7.3.1. Video Combinations...
FocalPoint Camera Control 8. FocalPoint Camera Control 8.1. Introduction The InCam-HG transmitter is fully interoperable with the Vislink FocalPoint system via the internal Data Receiver module. You can configure the Data Receiver via the InCam Transmitter menu. NOTE: You need a valid license to access the Camera Control items.