Advertisement
The JA-164J One-way four-button keyfob
LED indication table
Action
Activation (pressing) the button
Send enrollment signal
Deactivation (turn off) keyfob lock
or deactivation of acoustic
indication
Activation (turn on) keyfob lock
or activation of acoustic indication
Low battery
Holding the button – transmitting
of maintained signal for copy PG
Table: 2. Remote control indication
Battery replacement
Low battery indication is signalled on the remote control after any
button is pressed. The action assigned to the button is done and the red
LED flashes with 3 quick beeps. Low battery information is also sent to
the control panel. The remote still works as usual but the RF range goes
slowly down. Low battery indication is cancelled when a new battery is
inserted.
To change the battery, unscrew the 2 screws from the back plastic;
remove the cover with the metal strut from the housing. Then press any
button a few times to discharge the rest of the energy from the
capacitors and insert a new battery.
Don´t throw the used battery into the trash but take it to a suitable
recycling station.
The JA-164J One-way four button keyfob
Indication
0.5 s flash of red LED
1x short acoustic signal
1 s flash of red LED
0.5 s flash of red LED
1x short acoustic signal
2x0.5 s flash of red LED
2x short acoustic signals
Short flash of red LED
3x short acoustic signals
flashing 2x per 1 s
1x short acoustic signal
2 / 2
Technical specifications
Compatible with:
control panel FW LJ(MD)60416+; F-Link 1.4.0+
Power - lithium battery
(Power supply C class according to EN 50131-6)
Current consumption:
- Nominal consumption
- Maximal consumption
Low battery voltage detection
Typical battery lifetime
Communication frequency
RF range
Dimensions
Weight with no battery
Classification
- according to
- number of unique production codes
- environment
- operational temperature range
- average humidity
- certification body
Also complies with
Can be operated according to
JABLOTRON ALARMS a.s. hereby declares that the JA-164J is in
a compliance with the relevant Union harmonisation legislation:
Directives
No:
2014/53/EU,
2011/65/EU. The original of the conformity assessment can be
found at www.jablotron.com - Section Downloads.
Note: Although this product does not contain any harmful
materials we suggest you return the product to the dealer or
directly to the producer after use.
type CR 2032 (3.0 V/0.2 Ah)
33 mA
approx. 2 years (10 activations/day)
868.1 MHz
approx 100 m (line of sight)
77 x 36 x 15 mm
Security grade 2/environmental class II
EN 50131-1, EN 50131-3 (digital key)
>1 Million
indoor general
-10°C to +40°C
75 % RH, no condensation
Trezor Test s.r.o. (no. 3025)
ETSI EN 300 220, EN 50130-4,
EN 55022, EN 60950-1
ERC REC 70-03
2014/35/EU,
2014/30/EU,
MMJ58104
2.2 V
35 g
Advertisement
