Download Print this page

ZKTeco ZK-D1010S Quick Start Manual

Walk through metal detector

Hide thumbs Also See for ZK-D1010S:

Download this manual

Quick Start Guide

Walk Through Metal Detector:

ZK-D1010S

Version: 1.0

Contents I

Table of Contents

Page 1 Quick Start Guide Walk Through Metal Detector: ZK-D1010S Version: 1.0 Contents I...
Page 2 Contents 1 ZK-D1010S....................1 1.1 Parts..................... 1 1.2 Installation..................2 1.3 Technical Parameters..............3 Contents I...
Page 3: Zk-D1010S
1 ZK-D1010S 1.1 Parts 1.Control Unit Case 2..Power Line Interface 3.Built-in Probe 4. InfraredSensors 5.Waterproof Foot Cover...
Page 4: Installation
1.2 Installation Left door panel Right door panel Remove the packageof control unit and door panel. Put the control unit case and door panels as above picture shown, and then connect the left and right door panel with the control unit case by bolts and nuts.Tightening screws. Probe line of the left and right door panel tight inserted into the motherboard corresponding socket respectively.
Page 5: Technical Parameters
1.3 Technical Paramenters Input voltage:100-240V,50/60Hz Power:<30W Gross weight:55KG Working temperature: -25℃ ~ 55℃ Sensitivity: 100 steps adjustable Alarm:Sound alarm Inner Dimensions: 1990mm (High) x 700mm (Wide) x 400mm (Deep) External Dimensions:2215mm (High) x 820mm (Wide) x 475mm (Deep)