Overview Icons Inline control LEDs Function Call button Flashes green Incoming call Solid green On a call Volume up button Increases the listening volume Volume down button Decreases the listening volume Mute button Solid red Headset is muted...
(Blackwire 3315/3325 only) NOTE Headset call control functionality is not available. Load software Plantronics Hub for Windows/Mac is an invaluable headset tool. Download Plantronics Hub for Windows/Mac by visiting plantronics.com/software. Using Plantronics Hub, manage your headset settings. • Call control for softphones •...
Page 5
Position the boom This headset can be worn on the left or right side. Rotate the boom to align with your mouth. CAUTION To avoid breaking the boom, only rotate it up and over 180°. Adjust the boom Gently bend the boom in or out so it is approximately two finger widths from the corner of your mouth.
Basics Make/take/end calls Answer or end a call Tap the Call button or use your softphone. Make a call Dial using your softphone application. Redial If not on an active call, double key press the call button to redial the last call. Hold Press and hold the call button for 2 seconds to put a call on hold.
• If required to enable headset control (answer/end and mute) functionality, ensure you have Plantronics Hub for Windows/Mac installed. See Load software. • Your mobile device may not support call control functionality.
2020 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. Manufactured by Plantronics, Inc.