Advertisement
Tools needed:
Wrench: 9/16 & 7/16
Phillips Head
Screwdriver
Step 1 : Assemble the L Bracket Bases to the Vertical Rails
as shown below. Do this for all four Rails and L Bracket
Bases.
Step 3:
Left Arm Bracket
Center Arm Bracket
What's in the box:
QTY 4—L Bracket Bases
QTY 4—Upper Support Brackets
QTY 4
Left Arm Brackets
Center Arm Brackets
Flat Washer
7/16 Hex Nut
7/16 Hex Bolt
Right Arm Bracket
QTY 4—Vertical 10-32 Tapped Rails
QTY 4
QTY 4
Right Arm Brackets
Step 2 : Assemble the Upper Support Brackets to the top of
the Vertical Rails as shown below. Do this for all four Rails
and Upper Support Brackets.
Insert the Left and Right Arm Brackets into
the Center Arm Bracket as shown and
secure with included 7/16 hardware.
Make sure you set them for your desired
depth. Follow this step for each of the arm
assemblies.
* Note - Be sure the Center Arm is
centered so the weight is evenly
distributed.
QTY 32—Tooth Washers
QTY 16—9/16 Hex Nuts
QTY 16—9/16 Hex Bolts
QTY 32—Flat Washers
QTY 16—7/16 Hex Nuts
QTY 16—7/16 Hex Bolts
Advertisement
