Install The Frame - Kohler K-6138 Installation Manual

Hex Cap Screw
Short
Setscrew
Short
Setscrew
Long Setscrew
Leveling Foot
Threaded Peg

Install the Frame

Install the frame to the legs.
Loosely thread a hex cap screw into the upper hole of each of the frame collars.
Thread a short setscrew into the two lower holes of each of the frame collars.
Tighten the long setscrew (lower leg) until it is snug against the inside wall of the leg.
Tighten all short setscrews until they are snug against the legs.
Install a threaded peg to each leveling foot.
1114139-2-A
Short
Setscrew
Leg
Short
Setscrew Hex Cap Screw
6
Threaded Peg
Kohler Co.