Advertisement
4.
Hang furniture door with th
threaded rods (
1.).
5.
Lower furniture door and push the fixing brackets
down over the fastening screws on the appliance
door (
2.).
6.
Adjust the furniture door using the threaded rod
(Torx screwdriver).
Re-examine the dimensions of the crack
continuously.
7.
Close the door and re-examine to make sure that
the depth of the cabinet frontage corresponds with
the adjacent lying fronts. Correct if necessary.
8.
Tighten the fixing anglescr
depth adjustment.
9.
Close the door and check the lateral adjustment.
Correct the adjustment by lightly banging on the
edge of the open door by hand.
24
e adjusting rail onto the
ews in order to fix the
10. Screw nuts onto the threaded rods of the adjusti
rail and tighten! This way,
the door is fixed.
13. Screw on the lower fixing angle
The lateral adjustment of the door is fixed through
lower fastening angles.
The number of the lower fast
the width and the design of the furniture door.
Screw on lower bracket. Pre-drill holes into the fu
door!
1.
Loosen screw.
2.
Push bracket over the screw.
3.
Check the lateral position of the door.
4.
Screw in the wood screws.
5.
Tighten the screws.
6.
Insert the coverings via the fixing angle.
ng
the lateral adjustment of
the
ening angles depends on
rniture
Advertisement
