Advertisement
6.
Lengthen the markings to
angle of contact.
7.
Apply the fixing ribs (b) and mark out the holes.
8.
Pre-drill the holes.
9.
Screw on the fixing ribs (b).
10. Hang the furniture door on the threaded rods.
9.
Fastening the adjusting rib to the
furniture door
(freezer compartment)
1.
Measure distance
A between the adjusting ribs and
the bottom edge of the refrigerator compartment
door.
2.
Loosen the two nuts (a) and remove the adjusting
rib (b).
3.
Mark this value
A on the rear side of the furniture
door.
4.
Determine the middle of the door and label it.
5.
Rest the adjusting rib on the furniture door and
align to the markings. Mark the drill holes.
the parallels using an
6.
Pre-drill the holes.
7.
Tightly screw the adjusting rib.
Note:
21
Advertisement
