Sony SRP-P50 Operating Instructions Manual page 7

SPEAKERS
+
CH2 CH1
MONO
7 INPUT LEVEL selector switches
Switch according to the reference output level of the
equipment connected.
0 dBu : For professional audio equipment, etc.
–10 dBu: For general consumer audio and video
equipment, etc.
8 BAL/UNBAL selector switches
When set to UNBAL, signals can be input from the Phono
jack.
At this time, signals (UNBAL) input from the XLR
connector can be output from the Phono jack because it is
connected to the XLR connector inside, thus enabling
stacking. When connecting to this unit, take note that the
cable specifications may differ according to the equipment
connected.
Input cords for stacking connection.
SRP-E1500,E110
200LC
X3900
PHONO
Z800
P50
Equivalent to
XLR-3-11C相当 XLR-3-12C相当
XLR-3-11C
SRP-X1008
X6004
series
V300 シリーズ
X5000A
-
XLR-3-12C相当
Equivalent to XLR-3-12C
Equivalent to XLR-3-12C
9SPEAKER OUTPUT terminals
AC INPUT
9 Speaker output terminals
For connecting speakers. Connect the (+) of the speakers to
the red terminal, and the (–) of the speakers to the black
terminal. In monaural connection, use only the red
terminals. In this case, connect the (+) of the speaker to the
red terminal of CH1 and the (–) of the speaker to the red
terminal of CH2.
This unit
本機
This unit
本機
7