Technical Data; Maintenance; Installation Of The Fi Replace - Jøtul Terrazza XL Installation Instructions Manual

ENGLISH
Safety precautions
Installation of the fi replace must be according to local codes
and regulations in each country. All local regulations, including
those which refer to national and European standards, must be
observed when installing the product.Incidentally, the fi replace
should be placed in a safe distance to combustible materials,
with respect to sparks / hot coals and radiant.
You should talk to neighbours regarding the placing of the
fi replace regarding the smoke and smell.
NOTE: The fi replace must not be placed on the surface of
combustible materials!

Technical data:

Height: 160 cm
Width: 57 cm
Depth: 57 cm
Weight: 40 kg

Maintenance

The fi replace is produced in 2 mm Corten steel, which after a
short time gets a "rough" rust coating on the surface. This type
of steel is developed to obviate the need for painting, and form
a stable rust-like appearance if exposed to the weather for
several years.
NB: Rust can run down onto the surface and cause stains that
are diffi cult to remove. The surface should therefore be covered
to protect it.
The fi replace shall not be surface treated.
Installation of the fi replace:
Fig. 1
Put the steel plates towards each other (fi g. 1 and 2).
8
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Attach the screws and nuts to the tracks as shown (fi g.
3, 4, 5 and 6).