Care And Cleaning - Kohler K-11660 Installation And Care Manual

Overflow Ell
Plunger
Assembly
Bath Drain
Plunger Assembly Adjustment
NOTE: Adjust the plunger assembly until it is at the proper height.
Remove the hood from the overflow ell.
Remove the pin on the plunger assembly from the hood.
Remove the plunger assembly from the overflow ell.
Remove the pin from the link, then reinsert the pin at the proper
height.
Reinsert the plunger assembly into the overflow ell.
Reinstall the hood to the overflow ell.
Verify proper operation of the lever.

Care and Cleaning

For best results, keep the following in mind when caring for your
KOHLER product:
1114757-2-B
Pin
Hood
Plunger Assembly
8
Linkage
Rod
Kohler Co.