Subaru STARLINK Quick Manual page 47

FIRMWARE SOFTWARE UPDATES (continued)
4. If the system is not set to "Automatically Check for Updates", select "Download
Now" to begin the download. The download status progress is displayed in the upper
right of the screen. If you need to stop the download and restart at a later time, select
"Later" to stop the process.
5. Select "Install Now" to start the installation process. The installation process will take
several minutes to complete. If you need to stop the installation process,
press "Cancel".
6. When the installation is complete, select "I Agree" on the confirmation message
to complete the update process. By selecting "I Agree", the system will
restart automatically.
MAP UPDATES
Maps can be updated over a Wi-Fi
network. To update your maps, follow
this process:
1
Connect to a Wi-Fi Network. If you
need help with this, see page 27.
2
From the Home screen, select
"Settings" then "Navigation". Next,
select "Map Update" on the navigation
setting screen.
3
Select "Select Region (Max up to 8)"
to select the regions you would like
to update.
4
Select the regions for which maps are
to be updated.
5
Select "Back".
5
3
4
45