Headset Pairing: (Example) - Blueant SuperTooth II User Manual

HEADSET Pairing: (Example)

Bring the mobile phone to about 20cm from the Supertooth II.
1.
While the kit is in pairing mode, access the Bluetooth menu of your phone.
5.
(Kindly refer to your phone's manual.) Turn on its Bluetooth function then
execute a Bluetooth search so that it will be able to search and find your
Supertooth II. When the phone displays the list of the Bluetooth devices it
found, select the name of this kit (Supertooth II).
When the phone asks for a passcode, enter "0000".
6.
Pairing is successful if the alternating red/blue lights of Bluetooth Indicator
7.
will stop and then change to plain blinking blue. Normally, the phone would
also show briefly on its display if it's already paired and connected to
SuperTooth II or if pairing with it failed.
SuperTooth II is initially off. Turn it on by flipping up
2.
the Swivel Arm to 55º position. The Bluetooth
Indicator will glow (blue blink).
Simultaneously press the Reject Button and Pick-
3.
Up/Hang-Up
distinctive tone will be heard and The Bluetooth
indicator LED will change from blinking blue to
alternate blinking red and blue.
Press the Pick-Up/Hang-Up Button again. Press
4.
shortly (release immediately). Bluetooth indicator
blinking will be faster. The Supertooth II is now in
Headset Pairing Mode.
10
Button for about 10seconds. A