Usage Method - Magic mill MFD-1011 Instruction Manual

l The power cord can not be squeezed by something heavy or sharp, otherwise it will cause
a fire or electric shock.
l The temperature of accessible surface may be HIGH when the appliance is operating.
Before Use:
Cleaning:
Before using the first time, wipe all parts of the appliance. Clean the stainless steel trays, non-stick sheets,
mesh tray, with a lightly moistened cloth. Use detergent as needed. Don't put the main engine into water or
other liquids!
After cleaning the unit must be run in for 30 minutes without placing any food for drying during this period.
For the first time use, any smoke or smells produced during this procedure are normal.
Please ensure sufficient ventilation.
After the running in period, rinse the racks in water and dry all parts. This act is only necessary for the first
time. (But don't put the main engine into water or other liquids!!!)

Usage Method

Follow the simple Step-by-Step instructions below to successfully start and complete the drying process.
on a level surface.
Make sure that the dehydrator
1. Put the clean food in the trays – Do not overload the trays and never overlap the food. Close the door.
2. Plug dehydrator into wall outlet. There is a beep sound at the beginning when it starts up.
3. Press the "START/STOP" button , the unit will default to ( FAST mode and 10 hours
dehydrating timer. .
4. To Adjust Temperature (95 -165 )
Press the TIME/TEMP button and the temperature in the display window will begin to flash (if the time flashes,
press the TIME/TEMP button again).
Press the + or – buttons to select the desired temperature. To change the temperature rapidly,
- 4 -