Cisco ASR 9000 Series Manual page 41

Replacing Cisco ASR 9000 Series Router Components
Migrating from FC1 to FC2 Card
Procedure
Step 1 Remove the FC1 card from slot FC0. Follow the procedure explained in the topic
Cards from the Chassis, on page
Step 2
Insert FC2 card in slot FC0. Follow the procedure explained in the topic
page 27
Step 3
Wait for FC2 to come online. Verify the card state using the show controller fabric plane all command. In
the output, Admin State and Oper State value should be 01 (that means the card state is up), Links Down
should be zero, and the values of In pkt count and Out pkt count should be incrementing.
Example:
Router# show controllers fabric plane all
Wed Apr 13 08:32:02.464 PDT
Flags: Admin State: 1-Up 2-Down 12-UnPowered 16-Shutdown
Oper State: 1-Up 2-Down 3-Admin Down
Summary for All Fabric Planes:
Plane Id
=============================================================================================
0
1
2
3
4
5
6
Step 4 Repeat Step1 through Step 3 for migrating remaining FCs from slot FC1 to slot FC6.
Migrating from A99-SFC2 to A99-SFC3 Card
Cisco ASR 9912 and Cisco ASR 9922 chassis supports the A99-SFC3 fabric card.
Procedure
Step 1
Remove the A99-SFC2 card from slot FC0. Follow the procedure explained in the topic
Replacing Cards from the Chassis, on page
Alarms are raised when fabric cards are removed and when the system has a combination of old and new
generation fabric cards. These alarms clear when all the fabric cards are replaced.
25.
Admin State Oper State
01 01
01 01
01 01
01 01
01 01
01 01
01 01
Links Up Links Down
42 00
42 00
42 00
42 00
42 00
22 00
22 00
25.
Replacing Cisco ASR 9000 Series Router Components
Migrating from FC1 to FC2 Card
Removing and Replacing
Replacing Cards in the Chassis, on
In Pkt Count Out Pkt count
5942644519 5942644481
5906049163 5906047719
5939106251 5939105048
5933726816 5933725418
5931138987 5931137649
5920246359 5920245399
5920165028 5920163883
Removing and
41