Brake Switch - AEM VCU200 User Manual

Brake Switch

Drive Mode PRND Inputs
6/3/2020, Revision C
AEM Performance Electronics
th
2205 W 126 Street, Unit A
Hawthorne, CA 90250
A properly setup and configured Brake Switch input is
critical for safety and functionality.
1. Go to the Setup-Inputs group and select the
BrakeSwitch tab.
2. Use the example wiring diagram to add the Brake
Switch input to your VCU.
3. Read the notes and Descriptions and configure
for your application.
Discrete PRND switch inputs are required for indirect
drive applications. There is a choice between discrete
switch inputs or the AEM 8-Button CAN Keypad for direct
drive applications.
1. Go to the Setup-Inputs group and select the
PRND tab.
2. Use the example wiring diagram to add the
switch inputs to your VCU.
3. Read the notes and Descriptions and configure
for your application.
AEM EV VCU200 User Guide
Phone (8am-5pm M-F PST): 310-484-2322
Fax: 310-484-0152
sales@aemev.com
tech@aemev.com
Page 11 of 15