Contents Safety Information ..........2 Markings on the Product.........2 Environmental Information........3 Features ..............4 Accessories Included..........4 Stand y oti cations ..........4 TV Control Switch & Operation.......4 Inserting the Batteries into the Remote ....5 Connect Power ............5 Antenna Connection ..........5 oti cation ..............5 Speci cation ............5 Remote Control ............6 Connections............7...
Do not place any heat sources such as electric Safety Information heaters, radiators, etc. near the TV set. Do not place the TV on the floor and inclined CAUTION surfaces. To avoid danger of suffocation, keep plastic bags RISK OF ELECTRIC SHOCK DO NOT OPEN out of the reach of the babies, children and domestic animals.
WARNING WALL MOUNTING WARNINGS Do not ingest the battery, Chemical Burn Hazard This product or the accessories supplied with the Read the instructions before mounting your TV product may contain a coin/button cell battery. If the on the wall. coin/button cell battery is swallowed, it can cause The wall mount kit is optional.
Note: Screen Off option is not available if the Mode is set If the TV is on and it isn’t being operated for a while to Game. it will go into standby. When you next switch-on, the following message will be displayed. “TV switched to When the TV is not in use, please switch off or stand-by mode automatically because no operation disconnect the TV from the mains plug.
Changing Channels and Volume For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing You can change the channel and adjust the volume Limited. DTS, DTS-HD, the Symbol, & DTS or DTS-HD by using the Volume +/- and Programme +/- buttons and the Symbol together are registered trademarks of on the remote.
Standby: Switches On / Off the TV Remote Control TV: Displays channel list / Switches to TV Source Volume +/- Menu: Displays TV menu OK: Con rms user selections, holds the page (in T T mode), views channel list (DTV mode) Back/Return: Returns to previous screen, opens index page (in T T mode) Internet: Opens the portal page, where you can reach...
Connections NOTE: When connecting a device via the YPbPr or Side AV input, you must use the Connector Type Cables Device connection cables to enable connection. See the illustrations Scart on the left side. | You can use Connection YPbPr to VGA cable to enable (back) YPbPr signal via VGA input.
Press OK button on the remote control to continue Switching On/Off and the Network/Internet Settings menu will be To Switch the TV On displayed, if you con rm the previously displayed Connect the power cord to a power source such as a message asking whether you want to do the network settings.
CEC device from the Sources List menu. When Media Browser Menu new CEC source device is connected, it will be listed You can play photo, music and movie les stored on a in source menu with its own name instead of the USB disk by connecting it to your TV.
Page 11
TV Menu Contents System - Picture Menu Contents You can change the picture mode to suit your preference or requirements. Picture mode can Mode be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural. Contrast Adjusts the light and dark values on the screen. Brightness Adjusts the brightness values on the screen.
Page 12
System - Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Balance Adjusts whether the sound comes from the left or right speaker. Sets headphone volume. Headphone Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing.
Page 13
System - Settings Menu Contents Conditional Access Controls conditional access modules when available. Language You may set a different language depending on the broadcaster and the country. Enter correct password to change parental settings. You can easily adjust Menu Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN or change the Default CICAM PIN using the related options.
Page 14
This setting con gures the power up mode preference. Last State and Standby Power Up Mode options are available. Virtual Remote Enable or disable the virtual remote feature. With this setting you can enable and disable CEC functionality completely. Press Left or Right button to enable or disable the feature.
Note: 0000 or 1234. If you have General TV Operation selection) during the First Time Installation Using the Channel List The TV sorts all stored stations in the Channel List. Some options may not be available depending on the country You can edit this channel list, set favourites or set selection in the First Time Installation.
Operate it with the coloured buttons, cursor buttons and the OK button. The operation method may differ After the download is complete, your Finlux TV will depending on the contents of the digital teletext. Follow reboot and show a pop-up screen of how to launch the instructions displayed on the digital teletext screen.
After the download is complete, your TV will PC Input Typical Display Modes reboot and show a pop-up screen of how to launch The following table is an illustration of some of the the Freeview Play portal via your remote control typical video display modes.
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x400 640x480 800x600 832x624 1024x768 1152x864 1152x870 1280x768...
Page 23
and display the result when complete. Connectivity Advanced Settings Highlight Advanced Settings and press the OK Wired Connectivity button. On the next screen you can change the IP To Connect to a Wired Network and DNS settings of the TV. Highlight the desired one You must have a modem/router connected to an and press Left or Right button to change the setting active broadband connection.
Page 24
The Wireless feature of the TV supports 802.11 a,b,g Enter the Media Browser menu and the playback & n type modems. It is highly recommended that you device selection OSD will be displayed. Select your should use the IEEE 802.11n communication protocol mobile device and press the OK button to continue.
Page 25
discovery. A list of available wireless devices will be Wired Connectivity section for more information on displayed. Select the device you want to connect from the process. the list and press the OK button to connect. If “Device If the TV does not function using the wired connection, connected”...
Page 26
1. Nero Media Home Installation Use a LAN connection for quicker le sharing between other devices like computers. The Audio Video Sharing feature cannot be used if the server programme is not installed onto your PC or if Note: There may be some PC’s which may not be able to Audio Video Sharing feature due to administrator the required media server software is not installed and security settings (such as business PC’s).
Press the Exit button to exit iPlayer. Press the Return Internet Portal /Back button for going back to the previous screen. HINT: A broadband internet connection is required Note: “Episode is unavailable” message may be displayed for high quality viewing. You must set the country on the screen if a problem occurs during the playback.
Internet Browser To use the internet browser, enter the portal rst. Then launch the Internet application on the portal. (*) The appearance of the internet browser logo may change 2. Freeview Play via the ‘FPlay button’ In the initial screen of the browser, the thumbnails of Click Freeview Play button on your remote control.
Your TV is compatible with USB mice. Plug your retrieved from your TV and click on thumbnails to view mouse or wireless mouse adaptor into the USB input the detail pages. of your TV for easier and quicker navigation. EPG: You can view the broadcast schedules of Some web pages include ash content.
Page 30
VIDEOS: Provides videos on Youtube related to the 3. Mobile Device based on Android or iOS platform (Android OS 4.0 or higher; IOS 6 or higher selected programme. version) Note: For some functions an internet connection may be 4. Smart Centre app.(to be found on online required.
Important Instructions For your own safety read the following instructions carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN &...
Page 32
VESA WALL MOUNT MEASUREMENTS Sizes (mm) min. (mm) th (X) max. (mm) English VESA WALL MOUNT MEASUREMENTS Hole Pattern Sizes (mm) Screw Sizes Leng (X) Thread (Y) Deutsch MASSANGABEN FÜR VESA-WANDMONTAGE Lochmustergrößen (mm) Schraubengrößen Länge (X) Gewinde (Y) DIMENSIONS DU SUPPORT DE FIXATION MURALE VESA Dimensions des modèles de trous de montage (mm) Dimensions des vis Longueur (X)
Need help?
Do you have a question about the 55FME290B-P and is the answer not in the manual?
Questions and answers