Product Set Up; Stage One Use; Stage Two Use - Nuna Leaf Growb Instructions Manual

Product Set Up

1
- Align the seat mount with the base mount. Place the seat
directly down until it clicks into place. A "click" sound
means the seat and base are assembled completely. (1)
After assembly, pull up on the seat to ensure it is properly
secured to the base.

Stage One Use

Stage one can be used from birth until your child can sit
upright or can climb out unassisted.
1
- To secure your child, lift the ends of the harness straps
away from the seat cover to unfasten the hook and loop.
(2)
2
- Remove the harness straps from the harness loops. (3)
3
- Fold down the crotch support. (4)
4
- Fit the harness snugly to your child by sliding the
harness buckles, as needed. (5)
Place your child in the seat and reverse these steps to secure
your child in the harness.
Infant Insert
The infant insert can be used for stage one use to provide a
better fit for smaller babies.
1
- To remove the infant insert, unbuckle the harness and
route the harness straps through the infant insert holes.
(6)
9 LEAF grow instructions
Seat Cover
Discontinue using the seat cover when the infant can
sit upright, push up on hands and knees or climb out
unassisted (age around 6 months).
1
- To remove the seat pad, flip the seat over, unfasten the
hook and loop (7)-1 and detach the seat cover attachment
buckle from the seat frame (7)-2.
2
- Flip the seat over, and starting from the bottom, remove
the seat cover from the seat pad. (8)
3
- Slide the seat cover up, off the top of the seat pad. (9)

Stage Two Use

1
- The seat pad alone is for use as a chair when your child is
able to walk, up to 60 kg. (10)
Seat Pad
1
- To remove the seat cover, flip the seat cover and pull off
the velcro. (11)
2
- Flip the seat over, and starting from the bottom, remove
the seat pad from the seat frame (12)-1. Then, slide the
seat pad up, off the top of the seat frame (12)-2.
Discontinue stage two use when your child reaches 60 kg.
LEAF grow instructions 10