Subscribe to Our Youtube Channel
Related Manuals for SEW-Eurodrive GBG10 A Series
Summary of Contents for SEW-Eurodrive GBG10 A Series
- Page 1 *23569654_0717* Drive Technology \ Drive Automation \ System Integration \ Services Addendum to the Operating Instructions Keypad GBG10..A.. Edition 07/2017 23569654/EN...
- Page 2 SEW-EURODRIVE—Driving the world...
-
Page 3: Table Of Contents
Table of contents Table of contents General information........................ 4 About this documentation .................... 4 Structure of the safety notes ................... 4 Rights to claim under limited warranty ................ 6 Exclusion of liability...................... 6 Product names and trademarks.................. 6 Copyright notice ...................... 6 Other applicable documentation .................. 6 Device structure ........................ -
Page 4: General Information
General information About this documentation General information About this documentation The current version of the documentation is the original. This documentation is an integral part of the product. The documentation is written for all employees who assemble, install, start up, and service this product. Make sure this documentation is accessible and legible. - Page 5 General information Structure of the safety notes Hazard symbol Meaning Warning of dangerous electrical voltage Warning of hot surfaces Warning of risk of crushing Warning of suspended load Warning of automatic restart 1.2.3 Structure of embedded safety notes Embedded safety notes are directly integrated into the instructions just before the de- scription of the dangerous action.
-
Page 6: Rights To Claim Under Limited Warranty
General information Rights to claim under limited warranty Rights to claim under limited warranty Read the information in this documentation. This is essential for fault-free operation and fulfillment of any rights to claim under limited warranty. Read the documentation before you start working with the product. Exclusion of liability Read the information in this documentation, otherwise safe operation is impossible. -
Page 7: Device Structure
Device structure GBG10..A keypad Device structure GBG10..A keypad The GBG10..A keypad is intended for manual binary control of the connected ® MOVIGEAR or DRC.. drive unit in local operation. Following an example of keypad GBG10-11A-00: MODE MODE AUTO LOCAL SPEED SPEED BRAKE BRAKE... - Page 8 Device structure GBG10..A keypad 2.1.1 Functions of the GBG10..A keypad The GBG10..A keypad has the following functions: • Changeover between automatic mode (bus control) and local mode • Enable CW • Enable CCW • Stop (no enable) • Changeover between speed setpoint f1/f2 •...
-
Page 9: Type Designation
Device structure Type designation Type designation 2.2.1 Nameplate GBG 10-11A-00 ® Function Local Operation for MOVIGEAR / DRC.. Part number: 13575848 Serial number 2015-1000001 SERVICE Supply voltage: 24 V/DC 24h Service Hotline Rated current: 40 mA 0800 SEWHELP Maximum current: 60 mA 0800 7394357 Protection type:... -
Page 10: Electrical Installation
Electrical installation Connecting the GBG10..A keypad Electrical installation Connecting the GBG10..A keypad WARNING Risk of crushing if the drive unit starts up unexpectedly when connecting the CBG10..A keypad with switch position "CW" or "CCW". Severe or fatal injuries. • Before connecting the keypad to the drive unit, set the "MODE" switch to "AUTO" position and the rotary switch to "STOP"... -
Page 11: Startup
Startup Startup notes Startup Startup notes WARNING Electric shock due to dangerous voltages in the drive unit. Severe or fatal injuries. • Disconnect the drive unit from the power supply. Observe the minimum switch-off time after disconnection from the supply system: –... -
Page 12: Activating Local Mode With Dsc And Sni Units
Startup Activating local mode with DSC and SNI units Activating local mode with DSC and SNI units Local mode with the CBG10..A keypad is only possible if you activate local mode us- ing DIP switch S2/3 of the drive unit. To activate local mode, set DIP switch S2/3 of the drive unit to "ON"... -
Page 13: Activating Local Mode Using Dac Units
Startup Activating local mode using DAC units Activating local mode using DAC units When using DAC drive units, you need not activate local mode with the CBG10..A keypad. 4.3.1 Requirements for local mode The following requirements must be met for operating and switching the unit to local mode: Requirements on Firmware for command PCB... -
Page 14: Operation
Operation Operating notes Operation Operating notes WARNING Risk of crushing due to possible restart after re-establishment of the power supply or presence of the signals at the STO inputs. Severe or fatal injuries. • In emergency situations, set the "MODE" switch to "AUTO" position and the rotary switch to "STOP". -
Page 15: Local Mode Depending On Switch Position
Operation Local mode depending on switch position Local mode depending on switch position The following table provides an overview of drive unit operation depending on the switch position of the CBG10..A keypad: ® Button position Drive unit Brake/DynaStop operation control "MODE"... -
Page 16: Technical Data
Technical data GBG10..A Technical data GBG10..A Keypad GBG10-11A-00 Part number 13575848 ® Function Keypad for MOVIGEAR or DRC.. Nominal voltage DC 24 V /R E Nominal current 40 mA Maximum current 60 mA Connection M23 round connector, P insert, SpeedTec-cap- able, company: Intercontec, male, 0° coded Cable length 1 m Interference immunity... - Page 20 SEW-EURODRIVE—Driving the world SEW-EURODRIVE GmbH & Co KG P.O. Box 3023 76642 BRUCHSAL GERMANY Phone +49 7251 75-0 Fax +49 7251 75-1970 sew@sew-eurodrive.com www.sew-eurodrive.com...
Need help?
Do you have a question about the GBG10 A Series and is the answer not in the manual?
Questions and answers