Add New; Making A Call Through The Contact List; One-Touch/Two-Touch Dialing; Contacts - UTStarcom CDM1450 Owner's Manual

MAKING A CALL THROUGH
THE CONTACT LIST

ONE-TOUCH/TWO-TOUCH DIALING

Ideal for frequently dialed numbers, this feature allows entries in your
contact list to be dialed via the keypad with only one or two key presses.
In order for One-Touch/Two-Touch Dialing to properly work, it must be
enabled.
ONE-TOUCH DIALING
2-9: Press and hold the corresponding memory number for more than 1
second.
TWO-TOUCH DIALING
10-99: Press the first digit and second digits of the memory number short
and long respectively.
• If no phone number is stored in the location entered, "Location is
Note
empty" will appear on the screen.
• If One Touch Dial is set to Off:
Enter the speed dial location number then press the Send Key
• Location 1 is reserved for voicemail.
Location 2-99 are unassigned.
To assign a speed dial location, please see page 43.
38
Stores up to 500 entries, each of which can be assigned to a group.
Entries can be retrieved by name or group.

ADD NEW

Adds a new entry.
1.
Press Left Soft Key
then
2.
Fill in the fields as they are selected. Press the Navigation Key up
or down
PHONE BOOK FIELDS: Name/Mobile/Email/URL/Group/Ringtone/Vibration/
3.
To save the entry, press Left Soft Key
previous page, press
.
Note
[Menu], then press
"Add new".
/ to select a field.
Msg Alert/Photo/Secret/Memo
[Save]. To return to the
.
See page 32 for more detailed information about storing a number.

CONTACTS

"Contacts",
39