Wave Luxury M-1313 User Manual

Massage bathtub
9.5Temperature adjustment
9.5.1When the thermostatic heating function is on, press the Function
setting button " "till "℃"on LCD blinks, then press "
and" " to adjust the temperature. During the adjusting,
LCD displays the setting temperature, then the temperature shall be
increased /decreased 1 ℃after press"
stop adjusting for 5 seconds，LCD shall display the current water
temperature.
9.6 If the temperature sensor occurs error, LCD displays "E1" and the
controller sounds "di...di...", in this case the heater cannot be start.
10.Ozone (optional function)
When the pump is working, press"
the ozone. The ozone will be turned off automatically in 10 minutes.
11Drainage function after power off
Ensure that the main power supply is not cut-off. After turning off the
control panel, the drainage valve will be automatically turned on and
shut-off after 30 minutes.
"
"and " "once；
"to turn on or turn off
Page 1 of 1 1 1
User's Guide
IMPORTANT:
Read this manual before proceeding with installation of the bathtub and keep it
with the other accompanying documents.
This manual is valid for the installation of tubs both with and without whirlpool.
MODEL:M-1313
SIZE:1700X1700X720mm