Transferring Data - Fora 6 Plus Owner's Manual

Announcement of Memory Result by
Universal Tone
Only the most recent result that was saved can be announced
acoustically. If you press MAIN to turn the meter on, you will
first hear the Long-Beep which stands for power-on and then
the most recent result.
Only the average for the last 7 days is announced
acoustically. If the 7-day average cannot be calculated, three
horizontal bars are displayed. This is signaled acoustically
with 3 long beeps representing 3 zeroes.

Transferring Data

Data Transmission Via USB/ Strip_Port_
Comm Cable
1. Install the software on your computer
Download Health Care System Software and instruction
manual provided on the ForaCare Suisse AG Web site: http://
www.foracare.ch. Follow the instructions to install the
software on your computer.
2. Connect the device with your computer using a USB/
Strip_Port_Comm Cable
Connect the USB/ Strip_Port_Comm cable to a USB port
on your computer. With FORA 6 Plus switched off, connect
the other end of the USB/ Strip_Port_Comm cable to the
FORA 6 Plus data port. "PC" will appear on the meter display,
indicating that the meter is in communication mode
3. Transfer data to your computer
Follow the software on-screen instructions to transmit data.
Remove the cable and the device will automatically turn off.
Note:
• While the meter is in transmission mode, it will be unable
to perform a blood glucose test.
• USB/ Strip_Port_Comm Cable is optional. You may
purchase it at the store of your purchase.
EN-14