UTStarcom ARC VMUTX1 Getting Started Manual page 24

H BLUETOOTH
Bluetooth ® technology connectivity enables
wireless connections between electronic devices.
If connected with a Bluetooth ® Handsfree device,
you can use your phone more freely. It can also
be used to connect wirelessly to products that use
Bluetooth ® wireless technology. Since devices with
Bluetooth ® connectivity communicate using radio
waves, your phone and the other device do not
need to be in direct line-of-sight. The two devices
only need to be within 10 meters (30 feet) of each
other. The connection can be subject to interfer-
ence from obstructions such as walls or other
electronic devices. If you want more information
on this function, visit the Bluetooth ® Technology
organization Web site: https://www.bluetooth.org/.
To access the Bluetooth menu
1. In standby mode, press Menu > Tools & Settings
> Bluetooth.
To activate Bluetooth
®
The Power feature allows you to turn the Bluetooth
function on and off.
1. In standby mode, press Menu > Tools & Settings
> Bluetooth.
2. Press On/Off. Off Off.
To add a device
Pairing is the process that allows the phone to locate,
establish and register 1-to-1 connection with the target
device.
46 Connectivity
1. In standby mode, press Menu > Tools & Settings
> Bluetooth > New device > OK.
Note:
®
If Bluetooth is set to off, "Turn Bluetooth power on?"
will appear. Press Yes.
2. Instructions (Place device you are connecting
to in discoverable mode) will be displayed.
Highlight the device and press Pair.
3. In the case of a Bluetooth ® headset or
Bluetooth ® carkit, your phone will attempt
to auto pair with "0000" - 4 zeroes passcode.
If that passcode is incorrect, your phone will
prompt you for the correct passcode. Consult
the Bluetooth ® accessory instructions for the
appropriate passcode.
4. Enter the passcode and press OK.
Note:
The default passcode may differ depending on Bluetooth
devices. Please refer to the user guide of the Bluetooth
device that you wish to use.
5. Once pairing is successful, select Yes and press
OK to connect with the device.
6. Once paired, you will see the device listed in
the "New device" menu.
To turn on Discovery Mode
1. In standby mode, press Menu > Tools & Settings
> Bluetooth > Settings > Discovery mode.
2. Select On or Off > Off Select. Off >
To name the phone
1. In standby mode, press Menu > Tools & Settings
> Bluetooth > Settings > My phone name.
To select the supported profiles
1. In standby mode, press Menu > Tools & Settings
> Bluetooth > Settings > Supported profiles.
2. Select Headset or Headset Headset or Carkit > Select.
To remove a device from the paired list
1. In standby mode, press Menu > Tools & Settings
> Bluetooth > Select device > Options >
Remove Device.
To rename the paired device
1. In standby mode, press Menu > Tools & Settings
> Bluetooth > Select device > Options >
®
Rename Device.
®
To review information about the paired
device
1. In standby mode, press Menu > Tools & Settings
> Bluetooth > Select device > Options >
Device Info.
To call using a hands-free headset
1. Press the button once to call the last person.
To answer a call using a hands-free headset
1. Press the button once to receive the call.
H USING THE INTERNET
To access the Internet
1. In standby mode, press Menu > Surf the Web.
Note:
This will access your Wireless Web service provider's
homepage.
To view visited sites
1. In standby mode, press Menu > Surf the Web >
Menu > History.
2. Move the cursor up and down > Select.
To set new bookmarks
1. In standby mode, press Menu > Surf the Web >
Menu > Mark Page.
2. Press Save.
3. To edit, press Menu > Edit.
To view bookmarks
1. In standby mode, press Menu > Surf the Web
> Menu.
2. Move Bookmarks Tab with Navigation Key left
or right.
To search web site
1. In standby mode, press Menu > Surf the Web >
Menu > Search.
Connectivity 47