Safety Precautions - AGFA CR 85-X User Manual

Safety precautions

General safety instructions
•
For software and other technical platforms, and/or in combination with
any consumable, which constitute, after installation, a system for the
interpretation of medical image data: such system is used by trained and
qualified professionals. It is the user's responsibility to ensure that image
quality, display quality, environmental lighting and other possible
distractions are consistent with the clinical application.
The user must be aware, that automatic collimation could possibly lead to
misinterpretation of the image.
•
Make sure that the CR 85-X is constantly monitored in order to avoid
inappropriate handling, especially by children.
•
Only trained service personnel must make repairs. Only authorized service
personnel must make changes to the CR 85-X.
•
If there is any visible damage to the machine casing, do not start nor use
the CR 85-X.
•
If you want to connect the CR 85-X with other devices, components or
assemblies and if the technical data do not permit determining whether the
combination with these devices, components or assemblies involves
hazards, you must consult the respective manufacturers to avoid danger for
operating personnel or the environment.
• Do not override or disconnect the integrated safety features.
•
As is the case for all technical devices, the CR 85-X must be operated, cared
for and serviced correctly.
•
If you don't operate the CR 85-X correctly or if you don't have it serviced
correctly, Agfa-Gevaert is not liable for resulting disturbances, damages or
injuries.
•
When installing the CR 85-X, care must be taken to ensure that there is
either a mains plug or an all-cable disconnecting device in the internal
installation fitted near the CR 85-X and that it is easily accessible.
• If you notice conspicuous noise or smoke, disconnect the CR 85-X
immediately.
•
Check that the mains voltage is within the specified range of the self
adapting power supply of the machine.
4450A EN 20060221
CR 85-X D
IGITIZER
9
Introducing the CR 85-X